(Mechanical Optical Switch) 1X2 Mechanical optical switch, connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a opto-mechanical proprietary configuration and activated via an electrical control signal. support all wavelength at 850nm or 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance.
l Low Insertion loss
l Wide Wavelength Range
l Low Crosstalk, High Channel Isolation
l High Stability, High Reliability
l Epoxy-free on Optical Path
l Latching and Non-latching
Item
Parameter
Wavelength Range（nm）
850±40
1260~1650
Operating Wavelength
850
1310/1490/1550/1625/1650
Insertion Loss（dB）
Type: 0.8 Max: 1.2
Type: 0.5 Max: 0.8
Return Loss（dB）
MM≥30 SM≥50
Crosstalk（dB）
MM≥35, SM≥55
Polarization Dependent Loss（dB）
≤0.05
WaveLength Dependent Loss（dB）
≤0.25
Temperature Dependent Loss（dB）
Repeatability（dB）
≤±0.02
Power Supply（V）
3.0 or 5.0
Lifetime（time）
≥10^7
Switch Time（ms）
≤8
Transmission Power（mW）
≤500
Operating Temperature(℃)
-20~+70
Storage Temperature(℃)
-40~+85
Weight(g)
16
Dimension（mm）
（L）27.0×（W）12.6×(H)8.0
Notes:
1. All values specified are without connectors.
2. IL will increase 0.2dB when add one connector.
3. Customized service is available.
Pins
Type
Pin
Electric Drive
Status Sensor
1×2
channel
Pin1
Pin5
Pin6
Pin10
Pin2-3
Pin3-4
Pin7-8
Pin8-9
Latching
P1-P2
V+
GND
--
Open
Close
P1-P3
Non-latching
Electric
Specifications
Voltage
Current
Resistance
5V latching
4.5~5.5
36~44mA
125Ω
5V non-latching
26~32mA
175Ω
3V latching
2.7~3.3
54~66mA
50Ω
3V non-latching
39~47mA
70Ω
Optical Route
Status One
Status Two
Dimension (27×12×8.2mm)
l Optical Network, Network Test System
l Protection/Restoration
l Optical Singnal Routing
l Configurable Optical Add/Drop
l Transmitter and receiver protection